Testing the influence of rapid temperature changes on the Pennguard™ 55 Block Lining System

This report describes a laboratory study into the temperature cycling resistance of the Pennguard^TM Block Lining System, when using Type 55 Pennguard^TM Blocks.

A Pennguard^TM lined duct was exposed to high temperature exhaust gas from a burner, to alternate the lining temperature between ambient and 160˚C / 288˚F. The thermal cycle was repeated 1,000 times under controlled conditions.

Fill in the form and receive the Study report

Name*
Email*
Company
Receive study report*
- Placeholder
Interested in other reports?
- New Chimney Design with diffusor for increased draft and elimination of positive pressure
- STEAG Energy Services releases study on economics of wet stack modifications
- New Chimney Design resistant to strong earthquakes
- Wet Stack Constructions – Condensation Analysis
- Borosilicate Stack Liner Material for Wet Stacks – An Evaluation
- Chimney fires - Borosilicate linings protect chimneys against fire
- Testing the influence of rapid temperature changes on the Borosilicate Block Lining System
- TÜV Rheinland Health and Safety Study during a large scale Borosilicate installation