Four Corners Power Station, USA

2 x 770 MW units in New Mexico will be run with FGD Wet Stacks. This video shows how Hamon Custodis installs PennguardTM linings on the brick flues to stop condensate from permeating through the brick.
Read more
2 x 770 MW coal fired Power Station

2 x 770 MW coal fired Power Station

Four Corners Power Station is owned by Arizona Public Service. The two 770 MW units are equipped with wet limestone FGD systems. The scrubbed flue gas exit temperature will be lowered to 48ºC. With such low temperature FGD operation acidic flue gases will penetrate through brick liners. The owner found that the PennguardTM Block Lining System is an effective system to seal the brick from these acidic condensates.
A positive barrier

A positive barrier

This is the outside surface of the Four Corners Unit 4 and 5 brick liners where you can see the acid coming through the brick joints. A lightweight, impermeable PennguardTM lining will completely stop the permeation of acidic condensate through the brick.
No anchors, no supports

Flexible and adaptable

By their nature, most brick flues have irregularities such as bulges, offsets between bricks and narrow cracks. Thanks to the limited size of the PennguardTM Blocks and the flexibility of its adhesive, a PennguardTM lining will readily adapt to most of these irregularities.

No anchors, no supports

A PennguardTM lining is lightweight and fully bonded to the brick substrate by its adhesive. It does not require any anchors or supports that could lead condensate into the lining and create weak spots as a result of corrosion.
Flexible and adaptable
No anchors, no supports

No anchors, no supports

A PennguardTM lining is lightweight and fully bonded to the brick substrate by its adhesive. It does not require any anchors or supports that could lead condensate into the lining and create weak spots as a result of corrosion.

Flexible and adaptable

By their nature, most brick flues have irregualarities such as bulges, offsets between bricks and narrow cracks. Thanks to the limited size of the PennguardTM Blocks and the flexibility of its adhesive, a PennguardTM lining will readily adapt to most of these irregularities.
Flexible and adaptable
10 year guarantee

10 year guarantee

The PennguardTM linings are covered by Hadek’s full 10 year guarantee.
What's more, also view

What’s more, also view

Four Corners
WetReady Guide VaneTM
A SPECIAL GUIDE VANE THAT CAN BE USED SAFELY IN WET STACKS
Guide vanes reduce pressure losses, but they cannot be used in FGD Wet Stacks. Alden and Hadek have developed a special guide vane design that solves this problem.
Watch full video now
Shows in USA
Upcoming shows in the USA
HADEK PARTICIPATES IN FOMIS AND AREGC SHOWS IN THE USA
Hadek participates in two plant operation and maintenance shows in the USA: FOMIS - Clearwater, Florida, June 19-21 and AREGC - Lanier Island, Georgia, June 24 – 27
More information